It may seem like a lot of work to perform finishing work in rooms like the kitchen or bathroom. However, you should know that there are jobs like tile siliconing that can be done by people even without experience. Would you like to know how to go about it? Then be sure to read our guide.
There is no need to hire a specialist to silicone tiles in your bathroom. It is a simple task that also does not take much time. The cheaper solution is to do it yourself
Instead of wondering if you can do it yourself, you need to answer the more important question, namely: why is this a finishing job that cannot be forgotten? Water and moisture can get into the space between the tiles, which can contribute to mold. In addition, the dirt that accumulates there over time can cause an unpleasant smell. To avoid this problem, simply install silicone in them. In the next part of this guide, you will learn how to do this.
Before you get down to the finishing work, it is essential to find out what you need to do it. Make a list of things that are necessary, and then go to a construction store where you can buy high-quality silicone and the necessary tools. Sanitary silicone should not be missing from the list
It is worth buying a gun to apply it. You will also need a profiled spatula, thanks to which it will be possible to smooth the product. It is worth getting painter’s tape, white spirit and washing-up liquid. Paper towels and latex gloves can be useful.
If you have all the necessary tools at hand, you can move on to the finishing work. Here is a step-by-step guide on how to apply silicone so that all the spaces between tiles are tightly filled.
First of all, it is necessary to prepare the work area. Silicone can be applied to spaces that are well cleaned, dried and degreased. So before you proceed to apply the preparation in the gaps between the tiles, it is necessary to thoroughly clean them. It’s a good idea to wipe them several times with a toothbrush, then dry and degrease them. If you do not know what area should be well cleaned, you can tape it with painter’s tape so that you do not make a mistake while working.
The tip of the silicone gun needs to be cut in such a way that it fits well with the size of the gap in the tiles. This will ensure that the product is applied in a straight line and in the correct amount. This is a step that will reduce the number of corrections. At the same time, it is worth remembering to have all the necessary tools boiled at your fingertips. Silicone dries very quickly, so there is little time left for making corrections. So it is better not to waste it on looking for necessary accessories.
Then you can proceed to the siliconing. However, you should remember that the first portions of the product should be squeezed out onto the paper. Think carefully about the direction you want to take so that you can fill the gaps with silicone in a smooth and uninterrupted motion. In addition, it is very important that the silicone is always applied in the same amount. It cannot be applied too much or too little, as it will not look aesthetically pleasing or will not do its job.
If the section is covered with silicone, you can move on to smoothing it. This is best done with your finger or a spatula. However, before you use it, it is a good idea to apply some water and dishwashing liquid to its surface. Remember that the silicone should be smooth and facilitate the flow of water. It must not stick out and stop the flow of steam.
At the very end, seal the silicone with a small amount of white spirit. Remove all bumps and dirt. Peel off the painter’s tape and you’re done!
It turns out that siliconizing tiles is not difficult and complicated at all. If you follow the above-mentioned steps, you can do such a finishing job without any difficulties.
Źródło zdjęcia: Designed by Freepik