How do I know when my refrigerator is faulty?

How do I know when my refrigerator is faulty?
Author:
Publication date:
Category:
It takes approx. 4 minutes to read this article

Sponsored article

Home appliances are not foolproof and unfortunately, they often malfunction and cause a ton of problems in the home. There are also those malfunctions that remain hidden and although the appliance works, it is actually its last gasps or is no longer as effective as it once was. This problem often arises with refrigerator malfunctions. So how do you know that the refrigerator is breaking down? We suggest!

Failure of the compressor

The aggregate, commonly known as the compressor, is responsible for cooling in the refrigerator compartments. Its failure is a very common phenomenon and is usually manifested by spontaneous defrosting of the refrigerator, you may also notice that the bottom of the chamber collects water or on the walls is a lot of frost. This problem is the bane of old generation appliances, appliances that have been in use for many years or have not been properly maintained. The refrigerator should be defrosted and cleaned regularly to avoid this problem. To fix it, just buy and install refrigerator parts Amica and other popular home appliance companies offer replacement parts for their products

NO FROST system failure

This failure is very easy to recognize – if frost is where it shouldn’t be, it means that the NO FROST system is failing. A common cause of this failure is the lack of adequate air circulation in the refrigerator compartment. This can happen when the refrigerator is standing too close to a wall or is enclosed with cabinets all around, so there is no good ventilation. This system may return to normal when the refrigerator is properly set up or, if it has been a prolonged set up, the technology may have been damaged. In this case, home remedies fall out and you unfortunately have to take the fridge to a service center to have it repaired by professionals

Thermostat failure

If you notice that the temperature in your fridge is higher than what the unit is set to, it’s probably a problem with the thermostat. It doesn’t always have to be a failure right away. Perhaps the refrigerator is located next to a stove, for example, which has been cooking delicious food all day, and the power of the thermostat is simply too low to reduce the temperature and it would be worth moving the refrigerator further away from the heat source. If, on the other hand, the problem occurs despite the fact that the refrigerator is in a good place, it means that the thermostat is broken and, as in the case of NO FROST failure, you can not do without service

Water outlet blockage

Every refrigerator lets some water out from time to time, this is because new refrigerators have a special mechanism built into them that slightly defrosts the refrigerator every so often to clean it. If the water drain is unobstructed and water flows through it, no water should collect at the bottom of the cooling compartment. However, if this is not the case, you will notice that there is water floating in the refrigerator. In this case, find the drain and wipe it with a toothpick or cotton bud, this should do the trick. The water outlet often collects food scraps or thick liquids, which impede the flow once the refrigerator is defrosted

The refrigerator is one of the most important household appliances in the house. Without it, it is difficult to have fresh food and the ability to store food. This is why you should take care of your refrigerator, clean it regularly and defrost it to avoid malfunctions. Remember to position your refrigerator well away from heat sources, while maintaining a working triangle. Keep your refrigerator in good condition and don’t waste food.

Źródło zdjęcia: Designed by Freepik

Add comment

Your email address will not be published. Required fields are marked *

*